Solid-State Drive - HP Spectre Folio Maintenance And Service Manual

Solid-state drive

NOTE: The solid-state drive spare part kit includes replacement thermal material and thermal shielding
material.
Description
2-TB, M.2 2280, PCIe-3×4, NVMe, SuperSpeed solid-state drive with TLC
1-TB, M.2 2280, PCIe-3×4, NVMe, SuperSpeed solid-state drive with TLC
512-GB, M.2 2280, PCIe-3×4, NVMe, solid-state drive with TLC
256-GB, M.2 2280, PCIe-3×4, NVMe, solid-state drive with TLC
Before removing the solid-state drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the display panel (see
5. Remove the webcam (see
6. Remove the leather cover (see
Remove the solid-state drive:
1. Remove the two Phillips M2.0×2.3 broad head screws (1) that secure the solid-state drive and shield to
the system board.
2. Remove the thermal tape (2) that secures the solid-state drive shield to the heat sink.
58 Chapter 5 Removal and replacement procedures
Display panel on page
Webcam on page 36).
Leather cover on page
25).
41).
Spare part number
L38703-001
L38701-001
L38704-001
L38702-001