Power Button Board - HP Spectre Folio Maintenance And Service Manual

Power button board

Description
Power button board
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the display panel (see
5. Remove the webcam (see
6. Remove the leather cover (see
Remove the power button board:
1. Remove the Phillips M2.0×2.9 screw (1) that secures the power button board to the keyboard.
2. Remove the power button board (2).
Reverse this procedure to install the power button board.
60 Chapter 5 Removal and replacement procedures
Display panel on page
Webcam on page 36).
Leather cover on page
25).
41).
Spare part number
L38691-001