Speaker Assembly - HP Spectre Folio Maintenance And Service Manual

Speaker assembly

Description
Speaker assembly (includes left and right speaker assembly and cables and WLAN antenna cables
and transceivers)
Before removing the speaker assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the display panel (see
5. Remove the webcam (see
6. Remove the leather cover (see
Remove the speaker assembly:
1. Disconnect the speaker cables (1) from the system board.
2. Remove the Phillips M2.0×2.3 broad head screw (2) that secures WLAN support bracket to
the system board.
3. Remove the WLAN module support bracket (3).
NOTE:
46 Chapter 5 Removal and replacement procedures
Display panel on page
Webcam on page
Leather cover on page
The WLAN support bracket is available using spare part number L38683-001.
25).
36).
41).
Spare part number
L38700-001