Specifying An Ftp Command; Drive Name; Folder Name, File Name, And Extension - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

Specifying an FTP command

This section describes the method of specifying the files specified with the FTP command on the FTP client (external device
side) supported by the Ethernet-equipped module.
With the CPU module, the drive name and file name are distinguished when specifying the file.
When specifying a file with FTP, specify the target file with the following arrangement.
Item Description
Specification format [Drive name:\]Folder name
Example 3:\MAINSEQ1.QDR (other than drive 2)
2:\LOGGING\LOG01\00000001\LOG01_00000001.CSV (drive 2)
Specification details Refer to the following.
Page 124 Drive name (drive No.),Page 124 Folder name, file name, and extension
*1 Use "\" as the delimiter.
*2 The file name can be specified only when specifying a file stored in drive 2.
The section enclosed in square brackets [ ] in the specification format can be omitted.
■Drive name (drive No.)
Specify the drive name of the target memory for transferring the file.
For the correspondence of the target memory and drive names, refer to the following.
 MELSEC iQ-R CPU Module User's Manual (Application)
Omitting the drive name is the same as specifying the program memory (drive 4).

■Folder name, file name, and extension

• Specify the folder name and file name according to the rules provided in the following.
 MELSEC iQ-R CPU Module User's Manual (Application)
• The name determined for the CPU module is assigned for the extension.
• When using a FTP command that can be used for multiple files, specify the file name and extension with the wild card "*" or
"?". (Depending on the FTP client, there may be additional restrictions to the characters that can be used for the file name)
*: All files with the arbitrary character string (including none) are targeted from the position specified with "*".
?: All files with the arbitrary character string (excluding none) are targeted from the position specified with "?". ("?" can be used multiple times.)
1 FUNCTIONS
124
1.9 File Transfer Function (FTP server)
*2
\File name.Extension
* 1