Subcommands Usable With Quote Command; Executing The Stop Command - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

Ethernet
Hide thumbs Also See for MELSEC iQ-RJ71EN71:
Table of Contents

Advertisement

■Subcommands usable with quote command

This section describes the Ethernet-equipped module dedicated commands added to the quote command and used.
When executing this command from the FTP client, input the subcommand after the quote command.
("" means to input CR, Enter or the Return key.)
Ex.

Executing the STOP command

Input the following at the command prompt.
quote stop 
The following table lists the subcommands can be used.
: Executable, : Not executable
Command
Function
change
Shows or changes the CPU module file attributes.
*2
cpuchg
Specifies the access destination CPU module when using a
multi-CPU system configuration.
passwd-rd
Sets, shows or clears the file password (read password).
passwd-wr
Sets, shows, or clears the file password (write password).
password-lock
Changes the remote password from the unlock state to the
lock state.
password-unlock
Changes the remote password from the lock state to the
unlock state.
status
Displays the CPU module operation information.
run
Sets the CPU module to the RUN state.
stop
Sets the CPU module to the STOP state.
pm-write
Writes the program memory.
*5
fastmode
Enables or disables the high-speed write mode for the CPU
module, or displays its status.
*1 If executed, the process completes abnormally.
*2 This subcommand cannot be used when the connection destination is a CPU module.
*3 This subcommand is invalid when the RUN/STOP/RESET switch of the CPU module is set to STOP.
*4 Even if the subcommand is executed, the remote password remains locked with no error occurred.
*5 This subcommand can be used only when the connection destination is a programmable controller CPU. Before using this
subcommand, check the versions of the CPU module used. ( Page 406 Added and Enhanced Functions)
*1
CPU module status
STOP
RUN
Write
Write
enable
prohibit
*3
1.9 File Transfer Function (FTP server)
Remote password
Unlocked
Locked
*4
1 FUNCTIONS
123
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents