Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual page 150

Parameter
dev[31].format
direction
blkSize
devNamDisp
devNamCol
devNamBkCol
devNamWidth
devNamHeight
devValCol
devValBkCol
devValWidth
devValHeight
InCol
xPos
yPos
*1 When the device name is not displayed (devNamDisp = 0), no error occurs without this setting.
■Precautions
• Write all the necessary parameters. If the necessary parameters are not written or the setting value is out of range, an error
occurs.
• If the data format is the single-precision real number or double-precision real number, the positional notation will be the
decimal.
1 FUNCTIONS
148
1.12 Web Server Function
Item
The data format of the device 32
Display direction
Block size
Device name display
Character color of device name
Background color of device name
Cell width of device name
Cell height of device name
Character color of device value
Background color of device value
Cell width of device value
Cell height of device value
Line color
X-coordinate
Y-coordinate
Description
0: 16-bit signed
1: 16-bit unsigned
2: 32-bit signed
3: 32-bit unsigned
4: Single-precision real number
5: Double-precision real number
6: Bit
0: Vertical
1: Horizontal
1 to 32
(The number of lines is displayed when the display direction is
set to vertical, and the number of columns is displayed when the
display direction is set to horizontal.)
0: Not display
1: Display
The RGB value or color name
Example: #FF0000 (RGB value) or red (color name)
Positive real numbers (unit: px)
(For the horizontal display direction, the setting value of the cell
width of device value takes priority, and for the vertical display
direction, the setting value of the cell height of device value
does.)
The RGB value or color name
Positive real numbers (unit: px)
The RGB value or color name
The horizontal coordinate of the data block at the upper left end
(unit: px)
The vertical coordinate of the data block at the upper left end
(unit: px)
Requirement


(If omitted, it is
0.)


(If omitted, it is
1.)

*1





