Packet Setting; Writing The Protocol Setting Data - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

■Packet setting

Set the configuration of the send/receive packets on the "Packet Setting" window.
"Protocol Setting" window  Packet to be set
The above window opens when "Predefined Protocol Library" is selected on the "Add Protocol" window.
When "Add New" or "User Protocol Library" has been selected, configure the packets with the [Change Type] button and [Add
New] button.
For details on the packet elements, refer to the following.
Page 41 Packet elements

■Writing the protocol setting data

Write the protocol setting data to the Ethernet-equipped module.
[Online]  [Write to Module]
Select the module and memory into which the protocol data is to be written, and execute write.
When writing to a CPU module, the protocol setting data is written into the module extension parameters.
1.3 Communications Using the Predefined Protocol
1
1 FUNCTIONS
37