Remote Password Lock Status Storage Area; Remote Password Lock Status System Port; Forced Connection Invalidation Setting Area - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

Address
Un\G5325

Remote password lock status storage area

The remote password lock status of each connection is stored.
• 0: Unlocked or remote password not set
• 1: Lock status
Address b15 b14
Un\G5626 16 15

Un\G5629 64 63
The numbers in the table indicate connection numbers.
■Remote password lock status system port (Un\G5630)
Address
Un\G5630

Forced connection invalidation setting area

Set the connection to be forcibly invalidated.
• 0: Use allowed
• 1: Use prohibited
Address b15 b14
Un\G5646 16 15

Un\G5649 64 63
The numbers in the table indicate connection numbers.
■Forced connection invalidation system port (Un\G5650)
Address
Un\G5650
APPX
358
Appendix 3 Buffer Memory
Name
ZNWR instruction execution result
b13 b12 b11 b10
14 13 12 11
62 61 60 59
Description
Stores the remote password lock status of the system port in b0 to b4.
0: Unlocked or remote password not set
1: Lock status
The bits corresponding to each system port are shown below.
b0: Auto-open UDP port
b1: MELSOFT transmission port (UDP/IP)
b2: MELSOFT transmission port (TCP/IP)
b3: FTP transmission port
b4: MELSOFT direct connection
b13 b12 b11 b10
14 13 12 11
62 61 60 59
Description
Set the system port to be forcibly invalidated.
0: Use allowed
1: Use prohibited
The bits corresponding to each system port are shown below.
b0: Auto-open UDP port
b1: MELSOFT transmission port (UDP/IP)
b2: MELSOFT transmission port (TCP/IP)
b3: FTP transmission port
b4: MELSOFT direct connection
Description
Stores the execution result of the ZNWR instruction.
0: Completed successfully
Other than 0: Completed with an error (An error code is
stored.)
b9 b8 b7 b6
10 9 8 7
58 57 56 55
b9 b8 b7 b6
10 9 8 7
58 57 56 55
b5 b4 b3 b2
6 5 4 3
54 53 52 51
b5 b4 b3 b2
6 5 4 3
54 53 52 51
b1 b0
2 1
50 49
b1 b0
2 1
50 49