Settings On The Engineering Tool Side - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

■Settings on the engineering tool side

Set in the "Specify Connection Destination Connection" window.
[Online]  [Current Connection Destination]
1.
Set "PC side I/F" to "Ethernet Board".
2.
Double-click "Ethernet Board", and open the "PC side I/
F Detailed Setting of Ethernet Board" window.
3.
Set the network number, station number, and protocol of
the personal computer. (Set the network number and
protocol according to the settings for the Ethernet-
equipped module. Set the station number so that it is not
the same as a station number assigned to other
*1
Ethernet devices.)
4.
Set the "PLC side I/F" to the module to be connected.
1.1 Connection with MELSOFT Product and GOT
1
1 FUNCTIONS
19