Configuring And Assigning Parameters For The Et 200Isp - Siemens SIMATIC ET 200iSP Operating Instructions Manual

Commissioning guideline
2.9 Configuring the Example
2.9.2

Configuring and assigning parameters for the ET 200iSP

Step 1
In the upper left-hand window of HW Config, click on the stylized PROFIBUS to select it. Next,
go to the catalog and open PROFIBUS DP and ET 200iSP so that you can see IM 152. Double-
click this icon to insert an ET 200iSP station. In the dialog box that opens, change the address
to 3 and confirm with OK. At the bottom left, you can now see the new slots with an IM 152 in
slot 2.
38
Operating Instructions, 11/2017, A5E00247483-07
ET 200iSP