Inserting And Labeling The Power Supply, Interface Module, And Electronic Modules; Requirements - Siemens SIMATIC ET 200iSP Operating Instructions Manual

5.5 Inserting and labeling the power supply, interface module, and
electronic modules
5.5.1

Requirements

Properties
● The modules installed on the relevant terminal modules.
● Using a labeling strip, you can identify the interface module and the electronic modules.
● When you first insert an interface or electronic module, the coding element engages into
the terminal module. This prevents the wrong module being inserted.
The interface module and the electronic modules are self-coding.
Prerequisites
Keep to the wiring rules.
Required tools
4.5 mm screwdriver
ET 200iSP
Operating Instructions, 11/2017, A5E00247483-07

5.5 Inserting and labeling the power supply, interface module, and electronic modules

Wiring
123