Mechanical And Climatic Environmental Conditions - Siemens SIMATIC ET 200iSP Operating Instructions Manual

General technical specifications

8.4 Mechanical and climatic environmental conditions

Shipping and storage conditions
The distributed I/O station ET 200iSP exceeds the requirements of IEC 61131-2 for transport
and storage conditions. The following data applies to modules which are transported or stored
in the original packaging.
Type of condition
at user's discretion
Temperature
Temperature change
Barometric pressure
Relative humidity
See also
General Rules and Regulations for Wiring (Page 103)
8.4 Mechanical and climatic environmental conditions
Operating conditions
The ET 200iSP is designed for stationary use in weather-proof locations. The operating
conditions surpass requirements to DIN IEC 60721-3-3.
● Class 3M3 (mechanical requirements)
● Class 3K3 (climatic requirements)
Climatic environmental conditions
The following climatic environmental conditions apply:
Environmental conditions
Temperature
Temperature change
Relative humidity
Barometric pressure
Concentration of pollutants
Output current of power supply PS 24 VDC (6ES7 138-7EA01-0AA0): Power supply PS 24 VDC (Page 221)
1
Output current of power supply PS 120/230 VAC (6ES7138-7EC00-0AA0): Power supply PS 120/230 VAC (Page 224)
2
200
Areas of application
from -20 to 70°C
1 2
from -20 to 50°C
1 2
10 K/h
5 to max. 95 %
From 1,080 hPa to 795 hPa
SO : < 0.5 ppm;
2
rel. humidity < 60 %, no condensation
H S: < 0.1 ppm;
2
rel. humidity < 60 %, no condensation
ISA-S71.04 severity level G1; G2; G3
permissible range
≤ 1 m
from - 40 °to + 70 °C
20 K/h
from 1080 to 660 hPa (corresponds to a height of
-1000 to 3500 m)
from 5 to 95%, without condensation
Remarks
For horizontal installation
For all other mounting positions
-
Without condensation
Corresponds with an altitude of -1000
m to 2000 m
Test:
10 ppm; 4 days
1 ppm; 4 days
-
Operating Instructions, 11/2017, A5E00247483-07
ET 200iSP