Electronics Modules Suitable For Your Application - Siemens SIMATIC ET 200iSP Operating Instructions Manual

Configuration options

3.2 Electronics modules suitable for your application

3.2 Electronics modules suitable for your application
Which electronic module does what?
In the following table, you will find a guide to the applications of the electronic modules of the
ET 200iSP distributed I/O station.
Table 3-1 Electronic modules to suit your application
Application
Evaluating NAMUR sensors
Evaluation of connected, unconnected mechanical contacts
Acquisition of counted pulses
Measuring frequencies
Switching solenoid valves, d.c. relays, indicator lamps, actuators
Measuring currents with two-wire measuring transducers (stand‐
ard applications)
Measuring currents with HART field devices (2-wire transducers)
HART communication
Measuring currents with 4-wire measuring transducers (standard
applications)
Measuring currents with HART field devices (4-wire transducers)
HART communication
Measuring temperatures with resistance thermometers
Measuring resistance
46
8 input channels
4 output channels
Deactivation via High ac‐
tive, intrinsically safe
switching signal
4 output channels
Deactivation via Low ac‐
tive, intrinsically safe
switching signal
2 output channels
up to 60 VDC/up to 60 VAC
4 input channels
Input range
● 4 to 20 mA
● HART
4 input channels
Input ranges
● 0 to 20 mA
● 4 to 20 mA
● HART
4 input channels
Input ranges
● Pt 100, Ni 100
● 600 ohms
Operating Instructions, 11/2017, A5E00247483-07
Electronic modules
8 DI NAMUR
4 DO DC23.1V/20mA
SHUT DOWN "H"
4 DO DC17.4V/27mA
SHUT DOWN "H"
4 DO DC17.4V/40mA
SHUT DOWN "H"
4 DO DC23.1V/20mA
SHUT DOWN "L"
4 DO DC17.4V/27mA
SHUT DOWN "L"
4 DO DC17.4V/40mA
SHUT DOWN "L"
2 DO Relay UC60V/2A
4 AI I 2WIRE HART
4 AI I 4WIRE HART
4 AI RTD
ET 200iSP