Identification And Message Functions (I&M); Parameters Of The Digital Electronic Modules; Digital Electronic Module 8 Di Namur - Siemens SIMATIC ET 200iSP Operating Instructions Manual

Table 12-16 Permitted switching frequency for max. 1000 switching operations
For ohmic load, inductive load to
L/R = 10 ms
For inductive load in accordance
with IEC 947-5-1 DC 13/ AC15
Note
The voltage feed to the relay outputs is fuse-protected with a 6 A automatic circuit breaker with
tripping characteristic C.
12.4 Identification and Message Functions (I&M)
Description
Refer to the Chapter "Identification Data I&M (Page 58)".
12.5

Parameters of the digital electronic modules

12.5.1

Digital electronic module 8 DI NAMUR

Configuration with STEP 7 as of version 5.3 Service Pack 1 and current HW update
For a description, refer to the online help for STEP 7.
Configuration with GSD file
For digital electronic module 8 DI NAMUR, there are various configurations that you can select
using the following entries in the hardware catalog of the configuration software:
● "8 DI NAMUR" configuration: 8 digital inputs
● "2 Count/ 6 DI NAMUR" configuration: 2 counters and 6 digital inputs
ET 200iSP
Operating Instructions, 11/2017, A5E00247483-07
Resistive load
24 VDC
60 VDC
60 VAC
24 VDC
60 VDC
60 VAC
12.5 Parameters of the digital electronic modules
Voltage Current (max.)
2.0 A
1.0 A
0.5 A
2.0 A
1.0 A
2.0 A
1.0 A
0.5 A
2.0 A
1.0 A
Digital electronic modules
Switching frequency
(max.)
1 Hz
1 Hz
1 Hz
0.5 Hz
1 Hz
0.2 Hz
0.5 Hz
0.5 Hz
0.2 Hz
0.5 Hz
259