Mechanical And Climatic Environmental Conditions - Siemens SIMATIC ET 200X Manual

General Technical Specifications
6.3

Mechanical and climatic environmental conditions

Shipping and storage conditions
The ET 200X distributed I/O device exceeds the requirements of EC 61131-2 with
regard to transport and storage conditions. The following figures are valid for
modules that have been transported or stored in their original packaging.
Type of condition
Free fall
Temperature
Temperature variation
Air pressure
Relative humidity
Climatic environmental conditions
The following climatic environmental conditions apply:
Environmental conditions Operating ranges
Temperature
Temperature variation
Relative humidity
Air pressure
Contaminant concentration
6-6
From 0 to 55 _C
From 0 to 50 _C
From 0 to 40 _C
10 K/h
From 5 to 100 %
From 1080 to 795 hPa
SO : < 0.5 ppm;
2
rel. humidity < 60 %, no moisture con-
densation
H S: < 0.1 ppm;
2
rel. humidity < 60 %, no moisture con-
densation
Permissible range
BM/EM/frequency converter: v1 m
Motor starter:v 0.35 m
BM/EM, except the pneumatic module:
from –40 _C to +70 _C
Pneumatic module: from –30 _C to +70 _C
20 K/h
From 1080 to 660 hPa (corresponds to an
altitude of -1000 to 3500 m)
From 5 to 95 %, without condensation
Remarks
For horizontal installation; not
for pneumatic components
For horizontal installation of
pneumatic components
For all other installation posi-
tions
Corresponds to an altitude of
-1000 to 2000 m
Test:
10 ppm; 4 days
1 ppm; 4 days
ET 200X Distributed I/O Device
EWA 4NEB 780601602-06