DSX CableAnalyzer
Users Manual
Set Up a Project
Refer to the PROJECT screen in Figure 24 on page 61.
1
On the home screen, tap the PROJECT panel, tap CHANGE
PROJECT, then tap NEW PROJECT.
2
On the NEW PROJECT screen, enter a name for the project,
then tap DONE.
3
On the PROJECT screen, tap the Operator panel to enter an
operator name for the project.
4
On the PROJECT screen, tap the NEW TEST button to enter
the tests and test settings necessary for the project.
5
On the PROJECT screen, tap the NEW ID SET button to make
one or more sets of cable IDs for the project. See the CABLE ID
SETUP screen in Figure 25 on page 64.
6
On the PROJECT screen, tap DONE.
The PROJECT Screen
To start a new project, tap the PROJECT panel on the screen.
Figure 24 shows the PROJECT screen and describes the items you
enter to make a project.
60
riešenia na presné meranie