Entering An Address Manually - Sharp MX-M1100 User Manual

ENTERING AN ADDRESS MANUALLY

Destination addresses for Scan to E-mail and Internet fax can be entered manually.
For manual entry (using the numeric keys) of fax destinations, see
(1)
Scan Internet Fax
Address Book
Original
Address Entry
Exposure
Send Settings Resolution
Address Review File Format
1
Color Mode
File
Special Modes
Quick File
(2)
You can also display the address entry screen by touching the [Address Entry] key in the address book screen.
Select addressee type.
2
• If you wish the destination to be a Cc destination, touch the [Cc] key.
• The [Bcc] key only appears when Bcc has been enabled using "Bcc Setting" in the system settings (administrator).
If you wish the destination to be a Bcc destination, touch the [Bcc] key.
• When Internet fax mode is selected, the base screen appears after the destination address is entered. However, if
"I-Fax Reception Report On/Off Setting" is enabled in the system settings (administrator), the reception report
request screen will appear. If you wish to receive a report, touch the [Yes] key. If not, touch the [No] key.
• System Settings (Administrator): I-Fax Reception Report On/Off Setting
This setting is used to request a reception report when an Internet fax is sent. When the destination is specified by directly
entering the address, a message will appear asking you if you wish to receive a report.
• System Settings (Administrator): Bcc Setting
This setting enables or disables Bcc delivery. When enabled, the [Bcc] key appears in the address book screen and the
delivery type selection screen.
Fax Data Entry USB Mem. Scan
Scan: Auto 8½x11 Send:
Auto Text
200X200dpi
PDF PDF
Mono2
To Cc
"ENTERING FAX
Display the address input screen.
(1) Touch the tab of the mode that you wish to
use.
Auto
(2) Touch the [Address Entry] key.
Enter the destination address.
(1) If you are in scan mode, touch the key of the
desired delivery method.
Normally the [To] key is touched. This specifies that the
entered e-mail address will be a recipient.
(2) Enter the destination address in the text
entry screen that appears.
Enter the destination address and touch the [OK] key.
For the procedure for entering text, see "7. ENTERING
TEXT" in the User's Guide.
29
NUMBERS" (page 34).