1
BEFORE USING THE MACHINE
This chapter provides basic information about the machine. Please read this chapter before using the machine.
PART NAMES AND FUNCTIONS
EXTERIOR
(1)
Finisher*
This can be used to staple output. The optional punch
module can be installed to punch holes in output.
☞
FINISHER
(page 59)
*
(2)
Saddle unit
The output is folded at the center. The saddle stitch
function staples output at the centerline.
☞
SADDLE UNIT
*
(3)
Folding unit
This folds output.
☞
FOLDING UNIT
(4)
Inserter*
Paper loaded in the inserter can be inserted into output
from the machine as covers and inserts.
☞
INSERTER
(page 62)
*Peripheral device.
(1)
(page 60)
(page 61)
(2)
(3) (4)
(5)
Automatic document feeder
This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned.
☞
(6)
Front cover
Open this to remove a paper misfeed from the conveyor
unit or to switch the main power switch on and off.
☞
(7)
Toner cartridge installation cover
Open this cover to replace a toner cartridge.
(8)
Operation panel
This is used to select functions and enter the number of
copies.
☞
6
(5)
(6)
(7)
(8)
PLACING ORIGINALS IN THE AUTOMATIC
DOCUMENT FEEDER
(page 53)
TURNING THE POWER ON AND OFF
OPERATION PANEL
(page 10)
(page 18)