Paper Table - Sharp MX-M1100 User Manual

Caution
When placing paper, do not insert your fingers into the openings in the paper table.
4
Do not insert spare paper or other objects into openings inside the tray.
5
If you loaded a different type of paper than was loaded previously, change the paper type setting as explained in
"PAPER TRAY
Do not place heavy objects on the tray or press down on the tray.
Indicator line
SETTINGS" (page 77) in the System Settings.
Place the paper in the center of the

paper table.

Load the paper with the print side face up.
When a certain amount of paper is placed on the paper table,
the paper table will automatically descend slightly and then
stop. Continue loading paper in this way.
The paper stack must not be higher than the indicator line.
A maximum of 3000 sheets of paper can be loaded in the tray.
Gently push the paper tray into the
machine.
Push the tray firmly all the way into the machine. After the tray
is pushed in, the paper table will rise. While the paper tray
rises, the operation button indicator will blink. After the paper
tray finishes rising, the indicator will light solidly.
45