Checking A Reserved Job Or The Job In Progress (Fax Mode) - Sharp MX-M1100 User Manual

CHECKING A RESERVED JOB OR THE JOB IN
PROGRESS (FAX MODE)
The detailed contents of a broadcast transmission or serial polling job can be displayed. Select (touch) the key of the job
that you wish to check and touch the [Detail] key. The job details screen will appear (see below).
The job name and progress (number of completed destinations / total destinations) appear at the top of the screen.
To view details on the job, touch one of the tabs. The following information appears on each tab.
Tab name
Fax Connecting
Fax Waiting
Failed
All Destinations
Detail
Broadcast0001 Progress:
Fax No. : 0123456789
AAA AAA
Name:
Number: 050 Pages:
Fax Connecting Fax Waiting
Information on the current destination appears.
Fax No.: The fax number of the destination
Name: The name of the destination
Number: The broadcast control number (3-digits)
Pages: Number of pages completed / total number of pages
This shows information on the destinations that are waiting. A broadcast control
number (3-digits) appears in front of each destination.
Address: The name of the other destination
Status: The status of communication
This shows information on destinations for which communication failed. A broadcast
control number (3-digits) appears in front of each destination.
Address: The name or fax number of the destination
Start time: The time at which communication began
Status: The status of communication
This shows all destinations specified in the job. A broadcast control number (3-digits)
appears in front of each destination.
Address: The name or fax number of the destination
Start time: The time at which communication began
Status: The status of communication
166
OK
050/100
005/010
Failed All Destinations
Information displayed