Sharp MX-M1100 User Manual page 160

Covers/Inserts
Insertion Type A Settings
Paper Tray
Bypass
(A)
Tray
8½x11
(B)
Plain
(1)
4
• If both sides of the insert will be copied on, label sheets and tab paper cannot be used.
• When the insert paper is fed from the inserter, the insert cannot be copied on.
• If tab copy is selected in the insert settings, two-sided copying on the inserts is not possible.
Special Modes
Covers/Inserts
Cover Setting
Front
5
Cover
Back
Cover
(3) (2)
Cancel
Print on Insert Sheets
Yes No
1-Sided 2-Sided
Tab Copy
Cancel
Inserts Setting
Insertion
Type A
Insertion
Settings
Insertion
Type B
Tray Settings
Page Layout
Select insert settings.
(5)
(1) Select insert paper settings.
OK (A) The currently selected paper tray for the insert is
displayed.
(B) The size and type of paper in the currently selected
tray is displayed.
To change the paper tray for the inserts, touch the "Paper
Tray" key.
When the "Paper Tray" key is touched, a tray selection
screen appears. Select the desired paper tray in the tray
selection screen and touch the [OK] key.
(4)
Covers/Inserts
Insertion Type A
Inserter(Upper)
8½x11
Plain
Inserter(Lower)
8½x11
Plain
(2) If the insert will be copied on, touch the
[Yes] key. Otherwise, touch the [No] key.
If the [No] key is touched, only insert sheet insertion will
be performed.
In this case, go to step (5).
(3) To copy on one side of the insert, touch the
[1-Sided] key. To copy on both sides, touch
the [2-Sided] key.
(4) If you wish to perform tab copying, touch
the [Tab Copy] key.
When tab paper is used for inserts, the tab paper can be
copied on. To select tab copying, see
CAPTIONS ONTO TAB PAPER (Tab
(5) Touch the [OK] key.
If you wish to insert a different type of
OK
insert sheet, touch the [Insertion Type B]
OK
key.
The screen of step 4 appears. Settings are selected in the
same way as for insert type A. Follow the procedures in step 4.
When following the procedures, substitute "Insert Type B" for
"Insert Type A".
64
Large Capacity
Paper Tray
Tray
1. 8½x11 2. 8½x11 5. 11x17
Plain Plain Plain
6. 11x17
3. 11x17 Plain
Plain
7. 11x17
Plain
4. 8½x14
Plain
Copy)" (page 78).
OK
Bypass Tray
8½x11
Plain
"COPYING