Pcl Settings; Postscript Setting - Sharp MX-M1100 User Manual

*1 Only effective when a finisher or saddle stitch finisher is installed.
*2 This setting is used to adjust the line width of vector graphics. Except for CAD and other specialized uses, there is
normally no need to change this setting. Information on the selections is shown in
setting" (Table below).
*3 Paper sizes that can be used with this function are 11" x 17", 8-1/2" x 14", 8-1/2" x 11", A3, B4, and A4. (This function
may not take effect with some print methods.)
*4 Only effective when printing PDF, JPEG, and TIFF files.
*5 Can only be selected when [1 Staple at Back] is selected.
*6 Only effective when a punch module is installed on a finisher or saddle stitch finisher.
*7 Can only be selected when a folding unit is installed.
Selections for the line thickness setting
Selection 0
Minimum
Percentage
line width*
* All lines are the minimum line width.

PCL SETTINGS

This is used to set the symbol sets, fonts, and line feed code used in a PCL environment.
Settings
Item
PCL Symbol Set Setting
PCL Font Setting
PCL Line Feed Code
Wide A4

POSTSCRIPT SETTING

When a PS (PostScript) error occurs during PostScript printing, this setting determines whether or not an error notice is
printed.
This setting can be configured when the PS3 expansion kit is installed.
1 2 3
50% 75% 90%
Description
Specify the symbol set used for
printing.
Use this to select the font used for
printing.
This setting is used to select how
the printer responds when a line
feed command is received.
When this is enabled, 80
characters per line can be printed
on A4 size paper using a 10-pitch
font. (When this setting is
disabled, up to 78 characters can
be printed per line.)
4 5
95% 100%
Select from 35 items.
• Internal Font
• Extended Font
(List of internal fonts when extended fonts are not
installed.)
• 0.CR=CR; LF=LF; FF=FF
• 1.CR=CR+LF; LF=LF;FF=FF
• 2.CR=CR; LF=CR+LF; FF=CR+FF
• 3.CR=CR+LF; LF=CR+LF; FF=CR+FF
• (Enabled)
• (Disabled)
75
"Selections for the line thickness
6 7 8
105% 110% 125%
Selections
9
150%