Sending An Image In Fax Mode; Memory Transmission Mode - Sharp MX-M1100 User Manual

SENDING AN IMAGE IN FAX MODE

When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be
changed, the destination cannot be changed, and destinations cannot be added. To switch to Internet fax mode, touch the
[Cancel] key in the touch panel and follow the steps below.

MEMORY TRANSMISSION MODE

Normally this mode is used. The originals will be scanned into memory and then transmitted (memory transmission).If
multiple originals are placed in the automatic document feeder and the machine is not busy with another transmission
job, transmission will begin as soon as the first original is scanned and will continue while the remaining originals are
scanned (quick online transmission). If transmission cannot begin immediately because the line is in use, all pages will
be scanned into memory and the transmission will be reserved.
• Place 5-1/2" x 8-1/2" (A5) size originals in portrait (vertical) orientation (
( ), an incorrect size will be detected. For a 5-1/2" x 8-1/2"R (A5R) size original, enter the original size manually.
• Image rotation
1 8-1/2" x 11" and 5-1/2" x 8-1/2"R (A4, B5R, and A5R) originals are rotated 90 degrees and transmitted in
8-1/2" x 11"R or 5-1/2" x 8-1/2" (A4R, B5, or A5) orientation. 8-1/2" x 11"R and 5-1/2" x 8-1/2" (A4R, B5, and A5)
originals cannot be rotated for transmission.
• Originals cannot be scanned in succession from both the automatic document feeder and the document glass and
sent in a single transmission.
System Settings (Administrator): Rotation Sending Setting
This is used to select whether or not a scanned original image is rotated before transmission.
The factory default setting is: rotate 8-1/2" x 11" to 8-1/2" x 11"R, and 5-1/2" x 8-1/2"R to 5-1/2" x 8-1/2" (A4 to A4R,
B5R to B5, and A5R to A5).
(3)
5 10 15 To
Condition
Settings
AAA AAA
Address Review
CCC CCC
Address Entry
EEE EEE
Global
GGG GGG
Address Search
III III
Sub Address
2
Frequent Use
Sort Address
• There is no need to touch the [To] key.
• If the network scanner expansion kit and Internet fax expansion kit are not installed, the [To] key and [Cc] key will not appear.
• In addition to specification by a one-touch key, a destination can also be specified by a search number. You can
also manually enter a destination or look up a destination in a global address book. For more information, see
ENTERING
(2)
Cc
BBB BBB
DDD DDD
FFF FFF
HHH HHH
JJJ JJJ
ABCD EFGHI JKLMN OPQRST
Auto Reception
Fax Memory:100%
DESTINATIONS" (page 25).
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
Transmission
Specify the destination.
(1) Touch the [Address Book] key in the base
screen.
1
(2) Touch the key of the desired destination.
2
The icon appears in one-touch keys that contain fax
numbers.
(3) Touch the [Condition Settings] key.
UVWXYZ
54
). If placed in landscape (horizontal) orientation
"2.