Problems Related To Copy Results - Sharp MX-M1100 User Manual

PROBLEMS RELATED TO COPY RESULTS

Problem
The image is too light
or too dark.
Part of the image is
cut off.
Copies come out
blank.
Point to check
Is the image too light or too dark?
Has an appropriate exposure mode for
the original type been selected?
Has an appropriate ratio been selected
for the original size and paper size?
Are you using an AB size original?
Is the original placed face up or face
down correctly?
Select an appropriate exposure mode for the original
being copied and adjust the exposure level manually.
☞
CHANGING THE EXPOSURE AND ORIGINAL
IMAGE TYPE
Select one of the following modes depending on the
original type.
☞
SELECTING THE ORIGINAL TYPE AND MANUALLY
ADJUSTING THE EXPOSURE
• Text
Use this mode for regular text documents.
• Text/Prtd.Photo
This mode provides the best balance for copying an
original which contains both text and printed
photographs, such as a magazine or catalogue.
• Text/Photo
This mode provides the best balance for copying an
original which contains both text and photographs,
such as a text document with a photo pasted on.
• Printed Photo
This mode is best for copying printed photographs,
such as photos in a magazine or catalogue.
• Photo
Use this mode to copy photos.
• Map
This mode is best for copying the light color shading
and fine text found on most maps.
• Light original
Use this mode for originals with light pencil writing.
Select an appropriate ratio setting.
☞
REDUCTION/ENLARGEMENT/ZOOM
When copying an AB size original, specify the original
size manually.
☞
SPECIFYING THE ORIGINAL SIZE
When using the document glass, the original must be
placed face down. When using the automatic document
feeder, the original must be placed face up.
134
Solution
(page 24)
(page 24)
(page 26)
(page 30)