Adapting The Height Of The Chest Belt - Invacare Dragon Vertic Service Manual

SERVICE MANUAL
8.6

Adapting the height of the chest belt

Pre-requisites:
· 5 mm Allen key
WARNING: Risk of falling if the chest strap is not closed!
· Make sure that the Velcro strips on the chest strap cover each other completely!
· Always secure the chest strap with the additional belt (with the latch), before the chair is
raised up.
What should be observed when adjusting the height of the chest belt?
The height of the chest belt depends on the stability of the upper part of the body. The lesser the
stability, the higher the belt adjustment.
·
Loosen the Allen screws (1).
·
Adjust the height of the belt.
·
Re-tighten the screws.
64
®
Invacare - Dragon Vertic