Replacing The Shark Ii Remote - Invacare Dragon Vertic Service Manual

®
Invacare - Dragon Vertic
7.8

Replacing the Shark II Remote

Pre-requisites:
· Screwdriver for recessed head screws
·
Shut down the remote.
·
Pull the plug (1) out to the rear.
·
Release the wing screw (2).
·
Pull the remote and the remote holder out of
the guide device.
·
Use the screwdriver to remove the screws
(1) on the remote holder.
·
Remote assembly is carried out in the
reverse order.
·
Check all vehicle functions.
SERVICE MANUAL
37