Setting The Height Of The Remote; Adjusting The Width Of The Armrests - Invacare Dragon Vertic Service Manual

®
Invacare - Dragon Vertic
8.5.5

Setting the height of the remote

·
Loosen the wing screw (1).
·
Set the remote to the desired height.
·
Re-tighten the screw.
8.5.6

Adjusting the width of the armrests

The distance between the side sections can be adjusted by 5.5 cm on both sides (11 cm in total).
Requirements:
· Allen key 8 mm
Where to find the adjustment screws
The picture shows the position of the screws (1)
(underneath the seat frame, hidden in the
picture), that allow an adjustment to the width of
the side sections.
Doing the adjustment
·
Loosen the screw (1).
·
Set the side section in the desired position.
·
Re-tighten the screw.
·
Check the firm fit of the side section.
·
Repeat the process for the second side section.
SERVICE MANUAL
63