®
Invacare
- Dragon Vertic
8.4
Restraining straps for the legs
8.4.1
Opening and closing the restraining strap
·
Flip lever (1) over. The restraining bar is released.
·
Open the restraining strap (2) to the front.
·
If necessary, loosen the locking lever on the other
side and remove the entire strap.
·
The restraining strap is re-fitted in the reverse
order and closed.
8.4.2
Adjusting the position of the release lever
WARNING: Danger of injury, in case one of the fixation bolts loosens or falls out, as a
result of incorrect assembly!
· The lower nut on the fixation bolt must always be tightened to 15 Nm after all assembly work!
Requirements:
· Open-end spanner 13 mm
· Torque spanner 13 mm
·
Loosen the fixation nut (1) of the release lever.
·
Adjust the lever to the desired position.
·
Re-tighten the nut to 15 Nm.
SERVICE MANUAL
57