Setting The Resistance Of The Swing-Up Armrest; Adapting The Control Panel To The Length Of The User's Arm - Invacare Dragon Vertic Service Manual

SERVICE MANUAL
8.5.3

Setting the resistance of the swing-up armrest

The swing-up armrest is prevented from lowering under its own weight by the pre-set resistance.
Pre-requisites:
· 5 mm Allen key
·
Adjust the Allen screw (1)
until the desired resistance
of the armrest has been
achieved.
8.5.4

Adapting the control panel to the length of the user's arm

·
Loosen the wing screw (1).
·
Set the remote to the desired length by
pushing forward or backward.
·
Re-tighten the screw.
62
®
Invacare - Dragon Vertic