Adjusting The Retaining Bar And Knee Cushions; Setting The Depth Of The Restraining Strap - Invacare Dragon Vertic Service Manual

SERVICE MANUAL
8.4.3

Adjusting the retaining bar and knee cushions

8.4.3.1

Setting the depth of the restraining strap

Pre-requisites:
· 5 mm Allen key
What should be observed when adjusting the distance of the knee cushion to the shin?
If the distance of the knee cushion to the shin is too small, great pressure is asserted on the legs
when standing up. If the distance is too large, the user can "collapse" whilst standing up.
The holes in the inner and outer tubes are spaced
differently. The many possible combinations of holes
provide the ability to finely adjust the retaining bar.
·
Use the screw wrench to loosen the Allen
screws (1) and remove.
·
Set the desired knee strap position (choose
hole pattern combination inner tube/outer tube).
·
Replace the screws and tighten.
58
®
Invacare - Dragon Vertic