Battery Saver - Kenwood ProTalk TK-3601D User Manual

BATTERY SAVER

This transceiver has been designed to give you the most out of your battery power.
The battery saver function decreases the amount of power used when a signal is
not being received and no operations are being performed.
While using the transceiver, battery saver will automatically switch ON after
5 seconds have elapsed with no operations or received calls. Operating the
transceiver or receiving a call will switch this feature OFF until 5 seconds of non-
operation occurs again.
To turn this function on or off:
Enter the Function Setting mode {p.20}.
1
Press the
2
Press the Menu button then press the
3
value.
Short
Medium
Press the Menu button to confirm the selection, then press the PTT switch or
4
the Side button to exit the Function Setting mode.
Note:
◆ While the Battery Saver is operating, the beginning of the received voice may be cut off.
or button to select "
OFF The Battery Saver function is deactivated.
The Battery Saver function is activated and checks the presence
or absence of the signal at 240 ms intervals.
The Battery Saver function is activated and checks the presence
or absence of the signal at 560 ms intervals.
The Battery Saver function is activated and checks the presence
Long
or absence of the signal at 800 ms intervals.
".
or button to select your desired
22