Resetting The Transceiver - Kenwood ProTalk TK-3601D User Manual

At some point in time, you may desire to reset the transceiver settings to their
default values. (The default values are listed in the "Channel Menu Mode", "Front
Panel Programming Mode", and "Function Setting mode" tables.)
To reset the transceiver:
With the transceiver power OFF, press and hold the
1
turning the transceiver power ON.
• " " (reset) will appear on the display.
Release the
2
• The confirmation message "
Press the PTT switch to reset the transceiver.
3
• Press any other button to cancel the reset.
Note:
◆ Reset will function even if Super Lock has been activated.

RESETTING THE TRANSCEIVER

, or buttons.
" (sure) will appear on the display.
44
and buttons while