Second Channel - Kenwood ProTalk TK-3601D User Manual

SECOND CHANNEL

Apart from the channel you normally select, you can configure another channel
as the main channel with a dedicated [Second PTT]. The PTT for the second
channel is set with the key that registered the "Second PTT" function using button
assignment function in the setting mode.
With the second channel set, it alternately scans the second channel with the
channel you normally select.
If there is a received signal, you can stay on that channel and hear the sound.
Receiving stops
"
<
Standby status of normal selected channel
PTT SETUP:
You can set up the transceiver Side button or Menu button to perform Second PTT
functions.
Enter the Function Setting mode {p.20}.
1
2
Press the
3
Press the Menu button then press
< "
"
icon is off >
It alternately scans
or button to select "
" icon is blinks >
Receiving start
<
Scanning with second PTT function ON
"(Side)or "
or button to select "
40
" "
icon is light up >
" (Menu).
".