Power Saver Features; The Battery Saver Mode; Automatic Power Off (Apo) - Kenwood TH-28A Instruction Manual

POWER SAVER FEATURES
1 The Battery Saver Mode 2 Automatic Power Off (APO)
This transceiver provides a battery saver mode to
1 If no signal is received and if you have not performed
conserve on battery power. The battery saver circuit
any operations within 59 minutes, a 5 second audio
activates 10 seconds after the last key is pressed. tone sounds.
The squelch must be closed. This function
deactivates whenever a key is pressed or the
squelch opens.
2 The transceiver switches the power off 1 minute after
this tone sounds.
The battery saver dose not operate during scanning Note -
or T.ALT operations. E ven through the APO indicator appears on the
display, it will not activate during scanning or Tone
Press the F key, then press the 7 key to activate or Alert functions.
deactivate the battery saver function.
Battery Save Rate Selection
1 Press and hold the F key for longer than one
second, then press the 7 key.
2 Select the rate with the Tuning control.(1:1~1:16)
3 Press any front panel key.
48