POWER ON
Switch the transceiver power ON by turning the
Power switch/ Volume control knob clockwise.
• A confirmation tone sounds, the LCD lights up
momentarily, then the current zone and channel
number are displayed.
Zone number
ADJUST THE VOLUME
Set your desired volume level by rotating the Power switch/ Volume control knob.
• Clockwise increases the volume and counterclockwise decreases the volume.
Note:
◆ To adjust the volume using background noise as a reference in Analogue mode, use the
Squelch off Function.
SELECT A ZONE
Press and hold the Side button for 1 second to change Zone 1,
Zone 2, and Zone 3.
BASIC OPERATION
Channel number
Press and hold
Side button
8
Power OFF
/ Volume DOWN
Power ON / Volume UP