Voice Operated Transmission (Vox) - Kenwood ProTalk TK-3601D User Manual

VOICE OPERATED TRANSMISSION (VOX)

Connect a headset to the transceiver.
1
• The VOX function does not activate when a headset is not connected to the
SP/MIC jack of the transceiver.
Enter the Channel Menu mode {p.10}.
2
Press the
3
Press the Menu button then press
4
activate).
To transmit, speak into the headset.
5
• You do not need to press the PTT switch; the transceiver automatically
detects your voice and begins transmitting. The LED lights red.
• You can set the VOX Type, VOX Gain Level, and VOX Delay Time. Refer to
"VOX SETUP" {p. 30}.
Press the Menu button to exit the selection, then press the PTT switch or the
6
Side button to exit the Channel Menu mode.
or button to select "
OFF The VOX function is deactivated.
ON The VOX function activated.
".
or to select "
17
" (VOX function