Kenwood ProTalk TK-3601D User Manual page 41

SECOND CHANNEL OPERATION:
Enter the Function Setting mode {p.20}.
1
Press the Menu button then press the
2
or " " for the current zone.
Press the Menu button then press the
3
second channel.
~
When the Second PTT function is activated, "
4
scanning starts.
• When receiving the Second channel, the "
sounds.
Press the button programmed as [Second PTT] moves to the second channel
5
and transmits in that channel.
When the normal selected channel is in the reception state, the "
6
disappears.
• To transmit on a normal selected channel, press PTT switch.
Note:
◆ It is recommended to set different QT/DQT (Analogue) or COMMON ID (Digital) for the
normal selected channel and the second PTT channel respectively.
OFF The Second
1~16 Select a Second channel.
or button to select "
or button to select your desired
PTT
function is deactivated.
41
" icon is displayed and
" icon blinks and a beep
", " ",
" icon