VOX DELAY TIME
If the transceiver returns to receive mode too quickly after you stop speaking, the
end of your message may not be transmitted. To avoid this, select an appropriate
delay time that allows your entire message to be transmitted.
Enter the Function Setting mode {p.20}.
1
Press the
2
Press the Menu button then press the
3
value.
0.1/ 0.3/
/
/
0.5/ 1.0/
/
/
/
1.5/ 3.0
Press the Menu button to confirm the selection, then press the PTT switch or
4
the Side button to exit the Function Setting mode.
or
button to select "
Delay time can be selected from 0.1 second to 3 seconds.
".
or
button to select your desired
32