Battery Saver; Key Lock; Low Battery Warning (Nx-200S/ Nx-300S); Low Battery Warning (Nx-200/ Nx-300/ Nx-200G/ Nx-300G) - Kenwood NX-200GK Instruction Manual

B S
ATTERY AVER
The Battery Saver can be activated only on Conventional channels.
This function decreases the amount of power used when a signal is
not being received and no operations are being performed.
K L
EY OCK
Press the key programmed as Key Lock to lock and unlock the
transceiver keys.
• The following keys still function when Key Lock is activated:
Emergency, Backlight, Monitor, Monitor Momentary, Squelch Off,
Squelch Off Momentary, Function, Key Lock, PTT
L B
OW ATTERY
Press the key programmed as Battery Indicator. The LED
lights for 2 seconds, displaying the battery power remaining, as
described in the table below. When the battery power is very
low, recharge or replace the battery pack.
Lights Green
High
L B
OW ATTERY
Your dealer can set an alert tone to sound and the LED
indicator to blink red when the battery power is low. The
battery power icon displays the battery power remaining, as
described in the table below. When the battery power is very
low, recharge or replace the battery pack.
High
S S
IGNAL TRENGTH
(NX-200/ NX-300/ NX-200G/ NX-300G O
The signal strength indicator displays the strength of received
calls. No icon appears when no signal is available.
30
W
(NX-200S/ NX-300S)
ARNING
Lights Orange
Sufficient
W
(NX-200/ NX-300/ NX-200G/ NX-300G)
ARNING
Sufficient
I
NDICATOR
Lights Red
Low
Low
)
NLY
Blinks Red
Very low
Very low