Vox Setup - Kenwood ProTalk TK-3601D User Manual

VOX SETUP

Note:
◆ To use the VOX function, you need to set the VOX function to "ON" in Channel Menu
mode {p.17}.
VOX TYPE
Normal: When the voice level to the microphone is higher than the reference level
(VOX Gain Level), the transceiver automatically starts transmission.
Semi-VOX: Transmission is started by pressing PTT switch and transmission
continues even after PTT switch is released.
Enter the Function Setting mode {p.20}.
1
Press the
2
Press the Menu button then press the
3
value.
NORMAL The VOX type is normal VOX operation.
SEMI
Press the Menu button to confirm the selection, then press the PTT switch or
4
the Side button to exit the Function Setting mode.
or button to select " .
The VOX type is semi VOX operation.
or button to select your desired
30