SQUELCH LEVEL
You can adjust the default squelch level of the transceiver.
Enter the Function Setting mode {p.20}.
1
Press the
2
Press the Menu button then press the
3
value.
~
Note:
◆ In digital operation, Squelch Level is fixed at level 1.
Press the Menu button to confirm the selection, then press the PTT switch or
4
the Side button to exit the Function Setting mode.
or
button to select "
If you want to receive weak signal, decrease Squelch Level, and
0 ~ 3
if unnecessary signal exist, increase Squelch Level.
".
or
button to select your desired
25