Regency Contura RC500E Owners & Installation Manual page 52

RC500E
installation
8. Ensure Logs 2 & 3 are still connected after installing onto the burner.
From the left side - push left side of Log 1 forward until it is touching
the back of Log 2.
Log 1 - push left side forward to touch Log 2
9. Install Log 4 on the burner by lining up pin locators on the log with 2
pins on the burner.
4
Log 4 - install onto pins on burner
10. Placement of Log 4.
4
Log 4
919-881
| RC500E
52
3
2
1
11. Install Log 5 - place darker in of the log into the triangle created by
Logs 1,2 & 3. Gently place the other end of the log onto the pin on
the burner.
Log 5 - install
12. Placement of Log 5.
Log 5 - placement
13. Important: Spread the 3/4 Black Crystal glass over the burner evenly
to create a good flame. Space the crushed glass out, do not overload.
Use only 3lb of the 3.5lb bag of crushed glass.
Glass crushed glass on burner
2
5
5
07.04.18