Download Print this page

Regency R90 Specification Sheet

Regency wood fireplace specifications sheet
Hide thumbs Also See for R90:

Advertisement

Quick Links

Model
Emissions
Effi ciency (EPA)
BTU/h (EPA)
Flue Size
Log Size
Shipping Weight
Stripped Weight
C
A
Unit Dimensions Description
A
Unit Width w/ standoffs
B
Unit Height w/ standoffs
C
Unit Width
D
Unit Height
E
Unit Depth w/ standoffs
F
Unit Depth
Framing
Description
Dimensions
G
Framing Width
H
Framing Height
I
Framing Depth
J
Corner Wall Length
K
Corner Facing Wall Width
L
Inside Corner to Center Vent
M
Unit Corner Clearance
N
Inside Chase Framing Width
**
O
Hearth
Depth
**
P
Hearth
Width
Q
Thermal Protection Thickness
R
Combustible Ceiling Height
**
Required Non-combustible Hearth with thermal protection - Minimum
"K" Factor of 20.07 (CAN) or 0.84 (US)
NOTE: Hearth requires thermal protection in front of the fi replace and
must have at least 1/2" (13mm) Millboard under the fi nishing
material with minimum "k" factor of 20.07 (in Canada), 0.84 (in
US). If the bottom of the unit is raised 4" (102mm) above the
hearth, the thermal fl oor protection is not required.
June 2007 Regency Product Specifi cations Book
Wood Fireplaces
R90 Wood Fireplace
R90
3.72 g/hr
63%
11,720 (Low) to 42,400 (High)
8" (203mm) Diameter
20" (508mm)
612 lbs. (278 kg)
570 lbs (259 kg)
F
B
D
E
R90
43-5/8" (1108mm)
50-1/2" (1283mm)
38" (965mm)
42-5/8" (1067mm)
28" (711mm)
25" (635mm)
R90
USA Only
Canada Only
44" (1118mm)
44" (1118mm)
50-3/4" (1289mm)
50-3/4" (1289mm)
28" (710mm)
28" (710mm)
68" (1729mm)
81-1/2" (2072mm)
96-1/4" (2445mm)
115-3/8" (2930mm)
24-1/2" (624mm)
31-1/4" (795mm)
3" (76mm)
9-3/4" (248mm)
44" (1118mm)
60" (1524mm)
18" (457mm)
18" (457mm)
40" (1016mm)
40" (1016mm)
1/2" (12.7mm)
1/2" (12.7mm)
84" (2134mm)
84" (2134mm)
H
G
L
M
J
K
Finishing Material
Q
Thermal Protection
Safety Strip
NOTE: Safety strip is required when the fi replace rests on a combustible
surface, and should extend 2" in front and on the sides of the
fi replace. When using a wooden support to raise the fi replace.
A "Z" type safety strip, not supplied, must be fabricated (Use 20
gauge galvanized sheet steel).
R90 Wood Fireplace
CANADA ONLY
N
O
P
USA ONLY
N
I
O
P
R
Finishing
Material
2-1/2" (64mm)
Q
Z Type
2-1/2"
Safety Strip
Thermal
(64mm)
Protection
171

Advertisement

loading

Summary of Contents for Regency R90

  • Page 1 "k" factor of 20.07 (in Canada), 0.84 (in US). If the bottom of the unit is raised 4" (102mm) above the hearth, the thermal fl oor protection is not required. June 2007 Regency Product Specifi cations Book R90 Wood Fireplace 3.72 g/hr 20”...
  • Page 2 Combustibles may not extend to unit face. Do not notch wallboard around standoffs. The R90 may be placed on or near construction materials. The combustion air kit, fi re stop spacer and roof fl ashings (not chase fl ashings) may be placed directly on or against normal construction materials.
  • Page 3: Gravity Air Feed Kit Option

    The Gravity Air Feed Kit is designed to extend the heat output vent above the R90 to the front or the side. The upper louver opening is blocked off and fl ex vent is connected to the vent holes in the top of the unit and run to discharge vent grilles.