Page 1
WOOD Fireplace Insert www.regency-fi re.com Owners & Installation Manual MODELS: I2400M Tested by: Installer: Please complete the details on the back cover and leave this manual with the homeowner. Homeowner: Please keep these instructions for future reference. 918-171a FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4...
Page 2
The pride of workmanship that goes into each of our products will give you years of trouble-free enjoyment. Should you have any questions about your product that are not covered in this manual, please contact the REGENCY DEALER in your area. Keep those REGENCY FIRES burning.
Firebrick Assembly ...12 Draft Control ...12 Flue Baffl e & Secondary Air Tube Installation ...12 Door Handle ...12 Screen Door ...12 First Fire ...13 Regency I2400M TABLE OF CONTENTS THE REGENCY I2400 WOOD INSERT OPERATING INSTRUCTIONS Some Safety Guidelines ...13 Wood Storage ...14...
SAFETY LABEL This is a copy of the label that accompanies your Regency Insert. We have printed a copy of the contents here for your review. NOTE: Regency units are constantly being improved. Check the label on the unit and if there is a difference, the label on the unit is the correct one.
National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical code, CSA C22.1. Regency Inserts are designed with a 6" (152mm) fl ue. Requirements for Installing Solid-fuel Inserts in Factory-built Fireplaces.
Note: The grill has a front and rear, the holes on the front side have rounded edges and the rear holes have fl at edges. Regency I2400M The Straight Flue Adaptor (Part #846-504) shown here, may be used to produce a secure connection between your fl...
fl exible liner pipe is routed from the insert outlet collar to the top of the chimney. Regency highly recommends the use of a full liner as the safest installation and provides the most optimum performance. Your retailer should be able to help you decide which system would be the best for your application.
fi nal position. Now that your insert is installed, check once more that all the clearances from the unit to any combustible materials are correct as listed earlier. Regency I2400M...
NOTE: DO NOT ROUTE POWER CORD UNDER OR IN FRONT OF UNIT. 4) Push the Regency logo plate into the two holes in the front bottom left corner of the fan. Do not turn fan ON until your insert has reached operating temperature or at least 30 minutes after starting fi...
Handle Lock Back Side of Screen Shown NOTE: The handle must be positioned at 10 o'clock when closed to avoid the handle from getting hot and to ensure the screen stays in place. Handle at 10 o'clock position. Regency I2400M...
6) Do not permit creosote or soot buildup in the chimney system. Check and clean chimney at regular intervals. 7) Your Regency Insert can be very hot. You may be seriously burned if you touch the insert while it is operating. Warn children of the burn hazard.
fi rst year of use and at least once a year thereafter or when a signifi cant layer of creosote has accu- mulated (3mm / 1/8" or more) it should be removed to reduce the risk of a chimney fi re. Regency I2400M...
GLASS REPLACEMENT Your Regency Insert is supplied with 5 mm. Neoceram ceramic glass (Part #846-304) that will withstand the highest heat that your unit will produce. In the event that you break your glass...
MAIN ASSEMBLY & OPTIONS - I2400M Part # Description 846-910 Door Assy - Large Gold (no glass) 846-916 Door Assy - Large Blk (no glass) 846-304 Glass - Replacement 936-243 7/8" Adhesive Tape Gasket 846-920 Glass Retainer Clips (8/set) Screw 1/4-20 x 3/8"...
Faceplate & Trim Set - Oversize 295) 143-164 Trim Right Oversize 296) 143-162 Trim Top Oversize 297) 143-163 Trim Left Oversize 298) * Faceplate Side Oversize 299) * Faceplate Top Oversize *Not available as a replacement part. Regency I2400M FACEPLATES - I2400M...
Part # Description 70) 902-111 Brick Regular Full Size: 1-1/4" x 4-1/2" x 9" 75) 802-122 Brick Partial: 1-1/4 x 4-1/2" x 2" 76) 802-152 Brick Partial: 1-1/4" x 2" x 9" BRICK PANELS - I2400M Regency I2400M...
The authorized selling dealer is responsible for all in-fi eld service work carried out on your Regency product. FPI will not be liable for results or costs of workmanship from unauthorized service persons or dealers.