Trouble Isolation; Post Card Transfer Table; Change Warm Up Time - Olivetti d-Color MF651 Service Manual

Field Service Ver. 2.0 Jul. 2009
12.8.13

Trouble Isolation

A. Use
• Individual units and options have a set or unset setting for the trouble isolation function.
• When a problem occurs, this function enables the continuous use of the units that are not
affected by separately controlling them and isolating other units that have a problem.
• The machine isolates only units that have a "set" setting.
NOTE
• The malfunction detection mechanism is not applied to units and options that are
being isolated.
• This function can be selected for the following units and options.
Tray 1, Tray 2, Tray 3, Tray 4, LCT, manual, Half-Fold/Tri-Fold Center Stapling, Punch,
Staple, Scanner, ADF
• Though trouble isolation is not selected, if the specified malfunctions occur on the above
listed units or options, an alert screen appears and asks users whether to isolate the
units or options where malfunction occurs.
See the "Trouble shooting" section for the corresponding trouble codes.
See P.715
B. Procedure
• The default setting is Unset for individual units and options.
• After changing the setting, touch [Decision] and turn the main power switch OFF and ON
to make the new setting effective.
12.8.14

Post card transfer table

A. Use
• This setting allows you to select the transfer table to be used for thick3 postcards.
• For the use of thick 3 postcards, you can select the transfer table suitable for postcards.
• This setting is used to improve transfer performance to postcards.
Post. : The postcard 2nd image transfer table is used when printing on thick3 post-
cards.
Thick 3 : The normal thick3 2nd image transfer table is used when printing on thick 3
postcards.
B. Procedure
• The default setting is Thick 3.
12.8.15

Change Warm Up Time

• Not used.
Y110571-1
Set
Post.
Service Manual
12. SERVICE MODE
"Unset"
"Thick 3"
529