4.10 Paper Feed Section; Replacing The Tray 1 Feed Roller/Tray 1 Pick-Up Roller - Olivetti d-Color MF651 Service Manual

Field Service Ver. 2.0 Jul. 2009

4.10 Paper feed section

4.10.1

Replacing the tray 1 feed roller/tray 1 pick-up roller

A. Periodically replaced parts/cycle
• Tray 1 feed roller: Every 300,000 counts
• Tray 1 pick-up roller: Every 300,000 counts
B. Procedure
1. Slide out the tray 1.
2. Remove the rear right cover.
See P.91
3. Remove the tray 2 paper feed unit.
See the replacement procedures 1 to 8 in "Tray 2 feed roller/tray 2 pick-up roller."
See P.57
[1]
[2]
[1]
Y110571-1
4. PERIODICAL MAINTENANCE PROCEDURE
[2]
[3]
A0P0F2C004DA
[1]
A00JF2C008DA
Service Manual
4. Remove the harness from two wire
saddles [1] and the edge cover [2],
and disconnect the connector [3].
5. Remove four screws [1], take out the
tray1 paper feed unit [2] with the
upper right door open.
53