Table of Contents
Advertisement
Field Service Ver. 2.0 Aug. 2007
10. Malfunction code
10.1 Trouble code
• The machine's CPU performs a self-diagnostics function that, on detecting a malfunc-
tion, gives the corresponding malfunction code and maintenance call mark on the touch
panel.
Code
Malfunction code
Sheet feeder up/down
C1124
drive failure (lower)
Sheet feeder up/down
C1125
drive failure (upper)
Sheet feeder transporta-
C1126
tion drive failure
Output op punch driving
C1132
motor malfunction
Y107982-5
Detection timing
The tray upper limit sensor /Lw (PS209) or
tray lower limit sensor /Lw (PS210) are not
turned ON even after the set period of time
has elapsed after the tray lift motor /Lw
(M202) is energized.
The tray lower limit sensor /Up (PS205) or
tray upper limit sensor /Up (PS204) are not
turned ON even after the set period of time
has elapsed after the tray lift motor /Up
(M201) is energized.
The transfer motor (M203) speed does not
reach a specified level after a lapse of pre-
defined time after the transfer motor is
turned ON.
The after punch home sensor (PS301) is
not turned ON after a lapse of a given time
after the punch motor (M301) is turned ON.
Service Manual
10. Malfunction code
Trouble isola-
tion compli-
Rank
ant unit
Post Inserter
B
Post Inserter
B
Post Inserter
B
Post Inserter,
B
Punch
31
Advertisement
Table of Contents
