Field Service Ver. 2.0 Jul - Olivetti d-Color MF651 Service Manual

Field Service Ver. 2.0 Jul. 2009

12.9.19 User Paper Settings
A. Use
• To set and register individual user paper that includes a different basic weight, fusing
temperature, 2nd image transfer fine adjustment value.
• User Paper Settings is also available from [Administrator Settings]
[Expert Adjustment]
• To register a paper type that is suitable for individual customer's intended use and use
environment.
• The following shows user paper registration keys and corresponding paper types.User
Paper 1/2: Plain paper
User Paper 3
User Paper 4
User Paper 5
User Paper 6
B. Procedure
1. Call the Service Mode to the screen.
2. Select the key as follows.
[System 2] [
3. Select the desired key from [User Paper 1] to [User Paper 6] to register user paper.
4. Select [Basic Weight] and enter a value with the [ + ]/[ - ] key.
5. Select [Heating Side] or [Pressurizing Side] and enter a fusing temperature with the [ +
]/[ - ] key.
The setting range is -20 C to +5 C. (1 step: 5 C)
6. Select one from the following: [Front-Color], [Front-Black], [Back-Color], or [Back-
Black]. Enter a 2nd image transfer fine adjustment value with the [ + ]/[ - ] key.
The setting rage is -7 to +8. (1 step: 1 increment or decrement)
7. Set paper of A4S or 8
8. Select [1-side] (only front side) or [Front side] (only back side) and press the Start key.
9. Check the image of the output test pattern.
If the image is not acceptable, adjust the settings and output the test pattern again.
(1) Test Pattern in User Paper Settings
• The printable test pattern for user paper settings is provided to ease determining the
most appropriate 2nd image transfer output value when customizing user paper.
• This test pattern changes output voltage as shown below based on the standard voltage
A (voltage determined by the 2nd image auto transfer voltage control) on a sheet of
paper.
Y110571-1
[User Paper Settings].
: Thick1
: Thick1+
: Thick2
: Thick3
] [User Paper Settings].
/ x 11S on the manual tray.
1
2
Service Manual
12. SERVICE MODE
[System Settings]
A +600 V
A +400 V
A +200 V
A 0 V
A -200 V
A -400 V
A: Standard voltage
A -600 V
A0P0F3C539DA
541