Configuring The Intel ® Blade Server Ethernet Switch Module For The Intel; Blade Server; Chassis Sbce - Intel SBCE Setup Manual

Configuring the Intel
Module for the Intel
Complete the following steps to update the firmware of the Intel
®
the Intel Blade Server Chassis SBCE. No configuration is required on the Intel
Switch Module to enable SOL.
You will not be able to perform this procedure if the values for the network configuration of the Intel
Server Ethernet Switch Module for the Intel
the SBCE management-module network interfaces (eth0 and eth1). See "Configuring the management
module" on page 17 for information.
1. Get the latest version of the Intel
Chassis SBCE firmware from your Intel Corporation Support Representative
2. Start the SBCE management-module Web interface
interface" on page 3).
3. In the navigation pane, click
Current IP Configuration
4. Scroll to the
the same subnet as the SBCE management-module network interfaces (eth0 and eth1). If the values are
not in the same subnet, you must modify them before you continue. See "Configuring the management
module" on page 17 for information.
Bay 1 (Ethernet SM)* section; then, click Advanced Management
5. Scroll to the
Start Telnet/Web Session section; then, click Start Web Session.
6. Scroll to the
new Web browser session and connect to the Intel
7. Log in to the Intel
Maintenance
8. Click
Using Browser
9. Click
Upgrade Firmware/Configuration
10. Click
Browse;
11. Click
Start;
12. Click then, click
13. Select Restart System from the Navigation Pane.
14. The browser will close when complete.
24
®
Blade Server Ethernet Switch
®
Blade Server Chassis SBCE
®
Blade Server Chassis SBCE are not within the same subnet as
®
Blade Server Ethernet Switch Module for
I/O Module Tasks
®
Blade Server Ethernet Switch Module
.
.
then, select the firmware update file that you obtained in the first step.
Yes
to confirm each time you are asked a question.
®
Blade Server Ethernet Switch Module for
(see
"Starting the SBCE management-module Web
Management
--> .
section and make sure that it contains values that are within
®
Blade Server Ethernet Switch Module
interface.
Web
.
Intel® Blade Server Chassis SBCE: Serial over LAN (SOL) Setup Guide
®
Blade Server Ethernet
®
Blade
®
the
Intel

Blade Server

.
.
This will start a
Web interface.