Updating And Configuring The Bios - Intel SBCE Setup Manual

Updating and configuring the BIOS

Complete the following steps to update and configure the Intel
enable SOL:
1. Complete the following steps to update the Intel
a. Get the latest version of the Intel
Support Representative.
b. Update the blade server
received.
2. Complete the following steps to configure the Intel
a. Restart the blade server and press F1 when prompted to start the Configuration/Setup Utility
program.
Devices and I/O Ports;
b. Select
Serial Port A
•
Serial Port B
•
Select Remote Console Redirection;
c.
Remote Console Active
•
Remote Console COM Port
•
Remote Console Baud Rate
•
Remote Console Data Bits
•
Remote Console Parity
•
Remote Console Stop Bits
•
Remote Console Text Emulation
•
Remote Console Keyboard Emulation
•
Remote Console Active After Boot
•
Remote Console Flow Control
•
d. Press Esc twice to exit the
of the Configuration/Setup Utility program
20
I/O-module bay
SOL select
(J28)
2 - 3 3 3
I/O-module I/O-module
2 2
bay 1
1
1
®
Server Compute Blade SBXL52 BIOS from your Intel Corporation
, following the instructions that come with the update file that you
BIOS
then, make sure that the values are set as follows
: Auto-configure
: Auto-configure
then, make sure that the values are set as follows
: Enabled
: COM 2
: 19200
: 8
: None
: 1
: ANSI
: Hardware
Remote Console Redirection
Intel® Blade Server Chassis SBCE: Serial over LAN (SOL) Setup Guide
1 - 2
bay 2
®
Server Compute Blade SBXL52 BIOS to
®
Server Compute Blade SBXL52 BIOS
®
Server Compute Blade SBXL52 BIOS settings
: ANSI
: Enabled
Devices and I/O Ports
and
.
:
:
:
:
sections